Soldering

Lead has a lower melting point compared to most metals i.e., 327.5 degrees Celsius (Or 621.5 degrees Fahrenheit). What Affects Lead’s Melting Point? While the melting point of lead is around 327.6 degrees Celsius, lead (and other metals) can melt at different temperatures depending on several factors discussed below. I. External Pressure Lead’s melting point […]

Can You Remove Old Solder? Yes. In fact, you should remove it completely before adding fresh solder to preserve the strength and integrity of the joint. To remove the solder, you can use solder wick or a desolder pump. Can You Solder Over Old Solder? You can solder over old solder, but it isn’t advisable

Soldering is a popular method for joining metals together. The process utilizes an iron rod to heat up solder (metal alloy filler), which then flows into the joint and bonds metal pieces together such as the pin of an electrical component to the pad of a printed circuit board. In a typical soldering process, this

Solder paste and solder flux are both used in the process of soldering, which is a method for joining two pieces of metal by melting a filler metal that flows into the joint and then solidifies. While they are both used in the same process, solder paste and solder flux serve different purposes and have

When it comes to selecting soldering irons, the most common choice you get is between electric vs gas-fuelled. Based on the project that you are going to undertake, one may serve you better than the other. Let’s delve deeper into the world of electric vs gas soldering iron to know more about what’s the ideal